Added Serial Controll interface

Added Serial Controll interface

M5Stack-SAM/APPS.ino

@@ -4,7 +4,7 @@ void appQRPrint(){
   while(M5.BtnB.wasPressed()){
     M5.update();
   }  
-  QRPrint("www.google.com");
+  QRPrint("TomSuch|Prague CZ|www.m5stack.com|tomsuch@tomsuch.net");
   while(!M5.BtnB.wasPressed()){
     M5.update();
   }
@@ -12,8 +12,6 @@ void appQRPrint(){
   menuUpdate(menuidx, menulock);  
 }
 
-
-
 void appBLEBaecon(){
   byte beaconIdx = 0;
   menuDrawMenu(F("BLE BEACON SIMULATOR"),F(""),F("ESC"),F(""),sys_menucolor,sys_windowcolor,sys_menutextcolor);

M5Stack-SAM/M5Stack-SAM.ino

@@ -1,13 +1,17 @@
 #include <M5Stack.h>
+#include <Wire.h>
+
 #include "EEPROM.h"
 #include "utility/DHT12.h"
-#include <Wire.h>
 #include "SimpleBeacon.h"
 #include "qrcode.h"
+#include "SerialCommand.h"
 
 SimpleBeacon ble;
 DHT12 dht12;
 
+SerialCommand sCmd;
+
 #define TFT_GREY 0x5AEB
 #define TFT_BROWN 0x38E0
 
@@ -48,11 +52,20 @@ void setup(void) {
   sys_windowcolor = TFT_GREY;
 
   menuUpdate(menuidx, menulock);
-  
-  
+
+  sCmd.addCommand("eddystoneurl",    rcmdEddystoneURL);  
+  sCmd.addCommand("eddystonetlm",    rcmdEddystoneTLM);  
+  sCmd.addCommand("ibeacon",    rcmdIBeacon);  
+  sCmd.addCommand("sleep",    rcmdSleep);  
+  sCmd.addCommand("bright",    rcmdBright);  
+  sCmd.addCommand("clr",    rcmdClr);
+  sCmd.addCommand("qrc",    rcmdQRC);
+  sCmd.setDefaultHandler(rcmdDef);
+
 }
 
 void loop() {
+  sCmd.readSerial();
   if(M5.BtnA.wasPressed()) {
     if(menuidx>menuidxmin)menuidx--;
     menuUpdate(menuidx, menulock);

M5Stack-SAM/SYSTEM.ino

@@ -1,13 +1,152 @@
+void rcmdQRC(){
+  int aNumber;
+  char *arg;
+  arg = sCmd.next();
+  if (arg != NULL) {
+   QRPrint(arg); 
+  }
+}
+
+void rcmdSleep(){
+  M5.setWakeupButton(BUTTON_B_PIN);
+  M5.powerOFF(); 
+}
+
+void rcmdBright(){
+  int aNumber;
+  char *arg;
+  unsigned int tmpval;
+  
+  arg = sCmd.next();
+  if (arg != NULL) {
+    tmpval = atoi(arg);
+    if(tmpval >= 0 and tmpval <= 255){
+      EEPROM.write(0,tmpval);
+      EEPROM.commit();
+      M5.lcd.setBrightness(byte(EEPROM.read(0)));
+    }
+  }
+}
+
+void rcmdIBeacon(){
+  int aNumber;
+  char *arg;
+
+  unsigned int tmpmajor;
+  unsigned int tmpminor;
+  byte tmppwr;
+  
+  arg = sCmd.next();
+  if (arg != NULL) {
+    tmpmajor = atoi(arg);
+    if(tmpmajor >= 0 and tmpmajor <= 65535){
+      arg = sCmd.next();
+      if (arg != NULL) {
+        tmpminor = atoi(arg);
+        if(tmpminor >= 0 and tmpminor <= 65535){
+          arg = sCmd.next();
+          if (arg != NULL) {
+            tmppwr = atoi(arg);
+            if(tmppwr >= 0 and tmppwr <= 255){
+              ble.iBeacon(tmpmajor,tmpminor,tmppwr);
+              delay(100);
+              ble.end();
+              Serial.println("OK");
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+void rcmdEddystoneURL(){
+  int aNumber;
+  char *arg;
+
+  unsigned int tmppref;
+  unsigned int tmppwr;
+    
+  arg = sCmd.next();
+  if (arg != NULL) {
+    tmppref = atoi(arg);
+    if(tmppref >= 0 and tmppref <= 3){
+      arg = sCmd.next();
+      if (arg != NULL) {
+        tmppwr = atoi(arg);
+        if(tmppwr >= 0 and tmppwr <= 255){
+          arg = sCmd.next();
+          if (arg != NULL) {
+            ble.EddystoneURIPlain(tmppref,arg,tmppwr);
+            delay(100);
+            ble.end();
+            Serial.println("OK");
+          }
+        }
+      }
+    }
+  }
+}
+
+void rcmdEddystoneTLM(){
+  int aNumber;
+  char *arg;
+
+  unsigned int tmpvolt;
+  unsigned int tmptemp;
+  unsigned long tmpcount;
+  unsigned long tmptime;
+  
+  arg = sCmd.next();
+  if (arg != NULL) {
+    tmpvolt = atoi(arg);
+    if(tmpvolt >= 0 and tmpvolt <= 65535){
+      arg = sCmd.next();
+      if (arg != NULL) {
+        tmptemp = atoi(arg);
+        if(tmptemp >= 0 and tmptemp <= 65535){
+          arg = sCmd.next();
+          if (arg != NULL) {
+            tmpcount = atol(arg);
+            if(tmpcount >= 0 and tmpcount <= 4294967295){
+              arg = sCmd.next();
+              if (arg != NULL) {
+                tmptime = atol(arg);
+                if(tmptime >= 0 and tmptime <= 4294967295){
+                  ble.EddystoneTLM(tmpvolt,tmptemp,tmpcount,tmptime);
+                  delay(100);
+                  ble.end();
+                  Serial.println("OK");                  
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+}
+
+
+void rcmdClr() {
+  menuidx = 0;
+  menulock = 0;
+  M5.Lcd.fillScreen(TFT_BLACK);
+  menuUpdate(menuidx, menulock);  
+}
+
+void rcmdDef(const char *command) {
+  Serial.println(F("ERROR"));
+}
+
 void QRPrint(String inStr) {  
   M5.Lcd.setTextColor(TFT_BLACK, TFT_WHITE);
   M5.Lcd.fillScreen(TFT_WHITE);
 
-  uint32_t dt = millis();
   QRCode qrcode;
   uint8_t version = 6;
   uint8_t qrcodeData[qrcode_getBufferSize(version)];
   qrcode_initText(&qrcode, qrcodeData, version, 0, inStr.c_str());
-  dt = millis() - dt;
 
   uint8_t thickness = 220 / qrcode.size;
   uint16_t lineLength = qrcode.size * thickness;

M5Stack-SAM/SerialCommand.cpp

@@ -0,0 +1,144 @@
+/**
+ * SerialCommand - A Wiring/Arduino library to tokenize and parse commands
+ * received over a serial port.
+ * 
+ * Copyright (C) 2012 Stefan Rado
+ * Copyright (C) 2011 Steven Cogswell <steven.cogswell@gmail.com>
+ *                    http://husks.wordpress.com
+ * 
+ * Version 20120522
+ * 
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "SerialCommand.h"
+
+/**
+ * Constructor makes sure some things are set.
+ */
+SerialCommand::SerialCommand()
+  : commandList(NULL),
+    commandCount(0),
+    defaultHandler(NULL),
+    term('\n'),           // default terminator for commands, newline character
+    last(NULL)
+{
+  strcpy(delim, " "); // strtok_r needs a null-terminated string
+  clearBuffer();
+}
+
+/**
+ * Adds a "command" and a handler function to the list of available commands.
+ * This is used for matching a found token in the buffer, and gives the pointer
+ * to the handler function to deal with it.
+ */
+void SerialCommand::addCommand(const char *command, void (*function)()) {
+  #ifdef SERIALCOMMAND_DEBUG
+    Serial.print("Adding command (");
+    Serial.print(commandCount);
+    Serial.print("): ");
+    Serial.println(command);
+  #endif
+
+  commandList = (SerialCommandCallback *) realloc(commandList, (commandCount + 1) * sizeof(SerialCommandCallback));
+  strncpy(commandList[commandCount].command, command, SERIALCOMMAND_MAXCOMMANDLENGTH);
+  commandList[commandCount].function = function;
+  commandCount++;
+}
+
+/**
+ * This sets up a handler to be called in the event that the receveived command string
+ * isn't in the list of commands.
+ */
+void SerialCommand::setDefaultHandler(void (*function)(const char *)) {
+  defaultHandler = function;
+}
+
+
+/**
+ * This checks the Serial stream for characters, and assembles them into a buffer.
+ * When the terminator character (default '\n') is seen, it starts parsing the
+ * buffer for a prefix command, and calls handlers setup by addCommand() member
+ */
+void SerialCommand::readSerial() {
+  while (Serial.available() > 0) {
+    char inChar = Serial.read();   // Read single available character, there may be more waiting
+    #ifdef SERIALCOMMAND_DEBUG
+      Serial.print(inChar);   // Echo back to serial stream
+    #endif
+
+    if (inChar == term) {     // Check for the terminator (default '\r') meaning end of command
+      #ifdef SERIALCOMMAND_DEBUG
+        Serial.print("Received: ");
+        Serial.println(buffer);
+      #endif
+
+      char *command = strtok_r(buffer, delim, &last);   // Search for command at start of buffer
+      if (command != NULL) {
+        boolean matched = false;
+        for (int i = 0; i < commandCount; i++) {
+          #ifdef SERIALCOMMAND_DEBUG
+            Serial.print("Comparing [");
+            Serial.print(command);
+            Serial.print("] to [");
+            Serial.print(commandList[i].command);
+            Serial.println("]");
+          #endif
+
+          // Compare the found command against the list of known commands for a match
+          if (strncmp(command, commandList[i].command, SERIALCOMMAND_MAXCOMMANDLENGTH) == 0) {
+            #ifdef SERIALCOMMAND_DEBUG
+              Serial.print("Matched Command: ");
+              Serial.println(command);
+            #endif
+
+            // Execute the stored handler function for the command
+            (*commandList[i].function)();
+            matched = true;
+            break;
+          }
+        }
+        if (!matched && (defaultHandler != NULL)) {
+          (*defaultHandler)(command);
+        }
+      }
+      clearBuffer();
+    }
+    else if (isprint(inChar)) {     // Only printable characters into the buffer
+      if (bufPos < SERIALCOMMAND_BUFFER) {
+        buffer[bufPos++] = inChar;  // Put character into buffer
+        buffer[bufPos] = '\0';      // Null terminate
+      } else {
+        #ifdef SERIALCOMMAND_DEBUG
+          Serial.println("Line buffer is full - increase SERIALCOMMAND_BUFFER");
+        #endif
+      }
+    }
+  }
+}
+
+/*
+ * Clear the input buffer.
+ */
+void SerialCommand::clearBuffer() {
+  buffer[0] = '\0';
+  bufPos = 0;
+}
+
+/**
+ * Retrieve the next token ("word" or "argument") from the command buffer.
+ * Returns NULL if no more tokens exist.
+ */
+char *SerialCommand::next() {
+  return strtok_r(NULL, delim, &last);
+}

M5Stack-SAM/SerialCommand.h

@@ -0,0 +1,75 @@
+/**
+ * SerialCommand - A Wiring/Arduino library to tokenize and parse commands
+ * received over a serial port.
+ * 
+ * Copyright (C) 2012 Stefan Rado
+ * Copyright (C) 2011 Steven Cogswell <steven.cogswell@gmail.com>
+ *                    http://husks.wordpress.com
+ * 
+ * Version 20120522
+ * 
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ * 
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef SerialCommand_h
+#define SerialCommand_h
+
+#if defined(WIRING) && WIRING >= 100
+  #include <Wiring.h>
+#elif defined(ARDUINO) && ARDUINO >= 100
+  #include <Arduino.h>
+#else
+  #include <WProgram.h>
+#endif
+#include <string.h>
+
+// Size of the input buffer in bytes (maximum length of one command plus arguments)
+#define SERIALCOMMAND_BUFFER 32
+// Maximum length of a command excluding the terminating null
+#define SERIALCOMMAND_MAXCOMMANDLENGTH 8
+
+// Uncomment the next line to run the library in debug mode (verbose messages)
+//#define SERIALCOMMAND_DEBUG
+
+
+class SerialCommand {
+  public:
+    SerialCommand();      // Constructor
+    void addCommand(const char *command, void(*function)());  // Add a command to the processing dictionary.
+    void setDefaultHandler(void (*function)(const char *));   // A handler to call when no valid command received.
+
+    void readSerial();    // Main entry point.
+    void clearBuffer();   // Clears the input buffer.
+    char *next();         // Returns pointer to next token found in command buffer (for getting arguments to commands).
+
+  private:
+    // Command/handler dictionary
+    struct SerialCommandCallback {
+      char command[SERIALCOMMAND_MAXCOMMANDLENGTH + 1];
+      void (*function)();
+    };                                    // Data structure to hold Command/Handler function key-value pairs
+    SerialCommandCallback *commandList;   // Actual definition for command/handler array
+    byte commandCount;
+
+    // Pointer to the default handler function
+    void (*defaultHandler)(const char *);
+
+    char delim[2]; // null-terminated list of character to be used as delimeters for tokenizing (default " ")
+    char term;     // Character that signals end of command (default '\n')
+
+    char buffer[SERIALCOMMAND_BUFFER + 1]; // Buffer of stored characters while waiting for terminator character
+    byte bufPos;                        // Current position in the buffer
+    char *last;                         // State variable used by strtok_r during processing
+};
+
+#endif //SerialCommand_h