Brmdoor via libnfc

This is an access-control system implementation via contactless ISO 14443A cards and a PN53x-based reader. So you basically swipe your card, and if it's in database, the door unlocks.

Info about authorized users and their cards and keys is stored in sqlite database.

This was originally designed for Raspberry (Raspbian), but it also runs on desktop PC if you have the PN532 USB reader.

The daemon is implemented in brmdoor_nfc_daemon.py.

NFC smartcard API

This project shows how to use libnfc from python to send APDUs to NFC smartcards. Have a look at test_nfc.py for some examples, currently it shows four interactions with NFC smartcards:

• read NDEF message from token (Mifare Desfire, Yubikey Neo)
• do HMAC-SHA1 authenthication (Yubikey Neo)
• read Track 2 Equivalent Data from Visa
• execute signature for payment on Mastercard

It is much more general in use than to use it as authenthicator to open door.

Building and dependencies

You need just to run make. Additional dependencies:

• libnfc, in Debian and Ubuntu as libnfc-dev
• libfreefare, in Debian and Ubuntu install libfreefare-bin and libfreefare-dev
• python-axolotl-curve25519, in Ubuntu and Debian install python-axolotl-curve25519
• SWIG
• WiringPi2 pythonic binding (for switching lock on Raspberry)
• python-irc >= 16.0, use "pip install irc", the one in repos is old

All dependencies except for wiring can be installed via:

apt install libnfc-dev libfreefare-bin and libfreefare-dev python-axolotl-curve25519 swig2.0

Howto

1. Create the database

    python create_authenticator_db.py authenthicator_db.sqlite
   

2. Copy sample config file, edit your pins, DB file location, timeouts

    cp brmdoor_nfc.config.sample brmdoor_nfc.config
   

3. Add some users

• either authentication by UID, e.g.:

  ./brmdoor_adduser.py -c brmdoor_nfc.config -a uid 34795FCC SomeUserName
  

• authentication by Yubikey's HMAC-SHA1 programmed on slot 2

  ./brmdoor_adduser.py -c brmdoor_nfc.config -a hmac 40795FCCAB0701 SomeUserName 000102030405060708090a0b0c0d0e0f31323334
  

• to program Yubikey slot 2 to use HMAC with given key (requires package yubikey-personalization), use:

  ykpersonalize -2 -ochal-resp -ohmac-sha1 -ohmac-lt64 -oserial-api-visible
  

• authentication using signed UID as NDEF message on Desfire:

  ./brmdoor_adduser.py -c brmdoor.config -a ndef 04631982cc2280 SomeUserName"
  

• you need to generate Ed25519 keypair, store the private key somewhere safe and put the public in config file

  ./generate_ed25519_keypair.py
  

• you need to program the Desfire card to have the signature

  ./write_signed_ndef_on_desfire.py private_key_in_hex
  

Finally, run the daemon:

    sudo python brmdoor_nfc_daemon.py brmdoor_nfc.config

Configuring libnfc devices

If you have PN532 device on other bus than USB (e.g. SPI), first search for it using:

sudo nfc-scan-device -i

After that, create file /etc/nfc/libnfc.conf with line describing your device from nfc-scan-device above, e.g. for SPI device:

device.connstring = "pn532_spi:/dev/spidev0.0"

This daemon expects the library to be already configured to find the PN532 device.

If you installed libnfc from source, the default directory might be /usr/local/etc/nfc instead of /etc/nfc.

Notes

You could use Android Host Card Emulation to emulate a Desfire - it actually just expects one application, D2760000850101.

See an example of HCE NDEF emulation.