mirror of
https://github.com/brmlab/brmscope.git
synced 2025-10-31 05:53:59 +01:00
181 lines
6.9 KiB
Makefile
181 lines
6.9 KiB
Makefile
# Name: Makefile
|
|
# Project: USBaspLoader
|
|
# Author: Christian Starkjohann
|
|
# Creation Date: 2007-12-10
|
|
# Tabsize: 4
|
|
# Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
|
|
# License: GNU GPL v2 (see License.txt)
|
|
# This Revision: $Id: Makefile 798 2010-07-27 17:29:28Z cs $
|
|
|
|
###############################################################################
|
|
# Configure the following variables according to your AVR.
|
|
# Program the device with
|
|
# make fuse # to set the clock generator, boot section size etc.
|
|
# make flash # to load the boot loader into flash
|
|
# make lock # to protect the boot loader from overwriting
|
|
|
|
F_CPU = 12000000
|
|
DEVICE = atmega8
|
|
# BOOTLOADER_ADDRESS is 1800 for 8k devices, 3800 for 16k and 7800 for 32k.
|
|
BOOTLOADER_ADDRESS = 1800
|
|
FUSEOPT = $(FUSEOPT_8)
|
|
LOCKOPT = -U lock:w:0x2f:m
|
|
|
|
PROGRAMMER = -c dragon_isp -P usb
|
|
# PROGRAMMER contains AVRDUDE options to address your programmer
|
|
|
|
FUSEOPT_8 = -U hfuse:w:0xc0:m -U lfuse:w:0x9f:m
|
|
FUSEOPT_88 = -U hfuse:w:0xd6:m -U lfuse:w:0xdf:m -U efuse:w:0x00:m
|
|
FUSEOPT_168 = -U hfuse:w:0xd6:m -U lfuse:w:0xdf:m -U efuse:w:0x00:m
|
|
FUSEOPT_328 = -U lfuse:w:0xf7:m -U hfuse:w:0xda:m -U efuse:w:0x03:m
|
|
# You may have to change the order of these -U commands.
|
|
|
|
#---------------------------------------------------------------------
|
|
# ATMega8
|
|
#---------------------------------------------------------------------
|
|
# Fuse high byte:
|
|
# 0xc0 = 1 1 0 0 0 0 0 0 <-- BOOTRST (boot reset vector at 0x1800)
|
|
# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0
|
|
# | | | | | +-------- BOOTSZ1
|
|
# | | | | + --------- EESAVE (preserve EEPROM over chip erase)
|
|
# | | | +-------------- CKOPT (full output swing)
|
|
# | | +---------------- SPIEN (allow serial programming)
|
|
# | +------------------ WDTON (WDT not always on)
|
|
# +-------------------- RSTDISBL (reset pin is enabled)
|
|
# Fuse low byte:
|
|
# 0x9f = 1 0 0 1 1 1 1 1
|
|
# ^ ^ \ / \--+--/
|
|
# | | | +------- CKSEL 3..0 (external >8M crystal)
|
|
# | | +--------------- SUT 1..0 (crystal osc, BOD enabled)
|
|
# | +------------------ BODEN (BrownOut Detector enabled)
|
|
# +-------------------- BODLEVEL (2.7V)
|
|
#---------------------------------------------------------------------
|
|
# ATMega88, ATMega168
|
|
#---------------------------------------------------------------------
|
|
# Fuse extended byte:
|
|
# 0x00 = 0 0 0 0 0 0 0 0 <-- BOOTRST (boot reset vector at 0x1800)
|
|
# \+/
|
|
# +------- BOOTSZ (00 = 2k bytes)
|
|
# Fuse high byte:
|
|
# 0xd6 = 1 1 0 1 0 1 1 0
|
|
# ^ ^ ^ ^ ^ \-+-/
|
|
# | | | | | +------ BODLEVEL 0..2 (110 = 1.8 V)
|
|
# | | | | + --------- EESAVE (preserve EEPROM over chip erase)
|
|
# | | | +-------------- WDTON (if 0: watchdog always on)
|
|
# | | +---------------- SPIEN (allow serial programming)
|
|
# | +------------------ DWEN (debug wire enable)
|
|
# +-------------------- RSTDISBL (reset pin is enabled)
|
|
# Fuse low byte:
|
|
# 0xdf = 1 1 0 1 1 1 1 1
|
|
# ^ ^ \ / \--+--/
|
|
# | | | +------- CKSEL 3..0 (external >8M crystal)
|
|
# | | +--------------- SUT 1..0 (crystal osc, BOD enabled)
|
|
# | +------------------ CKOUT (if 0: Clock output enabled)
|
|
# +-------------------- CKDIV8 (if 0: divide by 8)
|
|
#---------------------------------------------------------------------
|
|
# ATMega328P
|
|
#---------------------------------------------------------------------
|
|
# Fuse extended byte:
|
|
# 0x03 = - - - - - 0 1 1
|
|
# \-+-/
|
|
# +------ BODLEVEL 0..2 (011 = 4.3V)
|
|
# Fuse high byte:
|
|
# 0xda = 1 1 0 1 1 0 1 0 <-- BOOTRST (0 = jump to bootloader at start)
|
|
# ^ ^ ^ ^ ^ \+/
|
|
# | | | | | +------- BOOTSZ 0..1 (01 = 2KB starting at 0x7800)
|
|
# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase)
|
|
# | | | +-------------- WDTON (1 = watchdog disabled at start)
|
|
# | | +---------------- SPIEN (0 = allow serial programming)
|
|
# | +------------------ DWEN (1 = debug wire disable)
|
|
# +-------------------- RSTDISBL (1 = reset pin is enabled)
|
|
# Fuse low byte:
|
|
# 0xf7 = 1 1 1 1 0 1 1 1
|
|
# ^ ^ \ / \--+--/
|
|
# | | | +------- CKSEL 3..0 (0111 = external full-swing crystal)
|
|
# | | +--------------- SUT 1..0 (11 = startup time 16K CK/14K + 65ms)
|
|
# | +------------------ CKOUT (1 = clock output disabled)
|
|
# +-------------------- CKDIV8 (1 = do not divide clock by 8)
|
|
|
|
|
|
###############################################################################
|
|
|
|
# Tools:
|
|
AVRDUDE = avrdude $(PROGRAMMER) -p $(DEVICE)
|
|
CC = avr-gcc
|
|
|
|
# Options:
|
|
DEFINES = #-DDEBUG_LEVEL=2
|
|
# Remove the -fno-* options when you use gcc 3, it does not understand them
|
|
CFLAGS = -Wall -Os -fno-move-loop-invariants -fno-tree-scev-cprop -fno-inline-small-functions -I. -mmcu=$(DEVICE) -DF_CPU=$(F_CPU) $(DEFINES)
|
|
LDFLAGS = -Wl,--relax,--gc-sections -Wl,--section-start=.text=$(BOOTLOADER_ADDRESS)
|
|
|
|
OBJECTS = usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o
|
|
|
|
# symbolic targets:
|
|
all: main.hex
|
|
|
|
.c.o:
|
|
$(CC) $(CFLAGS) -c $< -o $@
|
|
|
|
.S.o:
|
|
$(CC) $(CFLAGS) -x assembler-with-cpp -c $< -o $@
|
|
# "-x assembler-with-cpp" should not be necessary since this is the default
|
|
# file type for the .S (with capital S) extension. However, upper case
|
|
# characters are not always preserved on Windows. To ensure WinAVR
|
|
# compatibility define the file type manually.
|
|
|
|
.c.s:
|
|
$(CC) $(CFLAGS) -S $< -o $@
|
|
|
|
flash: all
|
|
$(AVRDUDE) -U flash:w:main.hex:i
|
|
|
|
readflash:
|
|
$(AVRDUDE) -U flash:r:read.hex:i
|
|
|
|
fuse:
|
|
$(AVRDUDE) $(FUSEOPT)
|
|
|
|
lock:
|
|
$(AVRDUDE) $(LOCKOPT)
|
|
|
|
read_fuses:
|
|
$(UISP) --rd_fuses
|
|
|
|
clean:
|
|
rm -f main.hex main.bin *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s
|
|
|
|
# file targets:
|
|
main.bin: $(OBJECTS)
|
|
$(CC) $(CFLAGS) -o main.bin $(OBJECTS) $(LDFLAGS)
|
|
|
|
main.hex: main.bin
|
|
rm -f main.hex main.eep.hex
|
|
avr-objcopy -j .text -j .data -O ihex main.bin main.hex
|
|
avr-size main.hex
|
|
|
|
disasm: main.bin
|
|
avr-objdump -d main.bin
|
|
|
|
cpp:
|
|
$(CC) $(CFLAGS) -E main.c
|
|
|
|
# Special rules for generating hex files for various devices and clock speeds
|
|
ALLHEXFILES = hexfiles/mega8_12mhz.hex hexfiles/mega8_15mhz.hex hexfiles/mega8_16mhz.hex \
|
|
hexfiles/mega88_12mhz.hex hexfiles/mega88_15mhz.hex hexfiles/mega88_16mhz.hex hexfiles/mega88_20mhz.hex\
|
|
hexfiles/mega168_12mhz.hex hexfiles/mega168_15mhz.hex hexfiles/mega168_16mhz.hex hexfiles/mega168_20mhz.hex\
|
|
hexfiles/mega328p_12mhz.hex hexfiles/mega328p_15mhz.hex hexfiles/mega328p_16mhz.hex hexfiles/mega328p_20mhz.hex
|
|
|
|
allhexfiles: $(ALLHEXFILES)
|
|
$(MAKE) clean
|
|
avr-size hexfiles/*.hex
|
|
|
|
$(ALLHEXFILES):
|
|
@[ -d hexfiles ] || mkdir hexfiles
|
|
@device=`echo $@ | sed -e 's|.*/mega||g' -e 's|_.*||g'`; \
|
|
clock=`echo $@ | sed -e 's|.*_||g' -e 's|mhz.*||g'`; \
|
|
addr=`echo $$device | sed -e 's/\([0-9]\)8/\1/g' | awk '{printf("%x", ($$1 - 2) * 1024)}'`; \
|
|
echo "### Make with F_CPU=$${clock}000000 DEVICE=atmega$$device BOOTLOADER_ADDRESS=$$addr"; \
|
|
$(MAKE) clean; \
|
|
$(MAKE) main.hex F_CPU=$${clock}000000 DEVICE=atmega$$device BOOTLOADER_ADDRESS=$$addr DEFINES=-DUSE_AUTOCONFIG=1
|
|
mv main.hex $@
|