From 8218ba6b930189ac93ba8126d911e9abf2bd75cf Mon Sep 17 00:00:00 2001
From: Pavol Rusnak <stick@gk2.sk>
Date: Sat, 23 Apr 2011 03:00:36 +0200
Subject: [PATCH] remove unused test.c

---
 firmware/test.c | 183 ------------------------------------------------
 1 file changed, 183 deletions(-)
 delete mode 100644 firmware/test.c

diff --git a/firmware/test.c b/firmware/test.c
deleted file mode 100644
index e1970f7..0000000
--- a/firmware/test.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * generic_hid.c
- *
- *  Created on: Jan 30, 2011
- *  Author: Jan Axelson
- *
- * Demonstrates communicating with generic HID-class USB devices 
- * using libusb-1.0 (libusb.org).
- * Sends and receives 2-byte reports.
- * Requires: an attached HID-class device that supports 2-byte
- * Input, Output, and Feature reports.
- * The device firmware should respond to a received report by sending a report.
- * Change VENDOR_ID and PRODUCT_ID to match your device's Vendor ID and Product ID.
- * See Lvr.com/hidpage.htm for example device firmware.
- * This firmware is adapted from code provided by Xiaofan.
- * Note: libusb error codes are negative numbers.
- * Compile with the -lusb option.
- */
-
-#include <errno.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <libusb-1.0/libusb.h>
-
-// Change these as needed to match idVendor and idProduct in your device's device descriptor.
-
-static const int VENDOR_ID = 0x1fc9;
-static const int PRODUCT_ID = 0x1337;
-
-// Values for bmRequestType in the Setup transaction's Data packet.
-
-static const int INSIZE = 64;
-static const int OUTSIZE = 64;
-static const int INTERFACE_NUMBER = 0;
-
-// Uses interrupt endpoint 1 IN and OUT:
-
-static const int INTERRUPT_IN_ENDPOINT = 0x81;
-static const int INTERRUPT_OUT_ENDPOINT = 0x01;
-static const int TIMEOUT_MS = 5000;
-
-int exchange_input_and_output_reports_via_interrupt_transfers(libusb_device_handle *devh);
-
-int main(void)
-{
-	struct libusb_device_handle *devh = NULL;
-	int hid_ready = 0;
-	int result = 1;
-
-	result = libusb_init(NULL);
-	if (result >= 0)
-	{
-		devh = libusb_open_device_with_vid_pid(NULL, VENDOR_ID, PRODUCT_ID);
-
-		if (devh != NULL)
-		{
-			// The HID has been detected.
-			// Detach the hidusb driver from the HID to enable using libusb.
-
-			libusb_detach_kernel_driver(devh, 0);
-			result = libusb_set_configuration(devh, 1);
-			if (result >= 0)
-			{
-				result = libusb_claim_interface(devh, 0);
-				if (result >= 0)
-				{
-					hid_ready = 1;
-				}
-				else
-				{
-					fprintf(stderr, "libusb_claim_interface error %d\n", result);
-				}
-			}
-			else
-			{
-				fprintf(stderr, "libusb_set_configuration error %d\n", result);
-			}
-		}
-		else
-		{
-			fprintf(stderr, "Unable to find the HID.\n");
-		}
-	}
-	else
-	{
-		fprintf(stderr, "Unable to initialize libusb.\n");
-	}
-
-	if (hid_ready)
-	{
-		// Send and receive reports.
-
-		exchange_input_and_output_reports_via_interrupt_transfers(devh);
-
-		// Finished using the HID.
-
-		libusb_release_interface(devh, 0);
-	}
-	libusb_close(devh);
-	libusb_exit(NULL);
-	return 0;
-}
-
-// Uses interrupt transfers to write an Output report to the HID
-// and receive an Input report from the HID.
-// Returns - zero on success, libusb error code on failure.
-
-int exchange_input_and_output_reports_via_interrupt_transfers(libusb_device_handle *devh)
-{
-	int bytes_transferred;
-	unsigned char data_in[INSIZE-1];
-	unsigned char data_out[OUTSIZE-1];
-	int i = 0;;
-	int result = 0;;
-
-	// Store data in the output buffer for sending.
-
-	for (i=0;i<OUTSIZE; i++)
-	{
-		data_out[i] = 0x40+i;
-	}
-	// Write an Output report to the device.
-
-	result = libusb_interrupt_transfer(
-			devh,
-			INTERRUPT_OUT_ENDPOINT,
-			data_out,
-			OUTSIZE,
-			&bytes_transferred,
-			TIMEOUT_MS);
-
-	if (result >= 0)
-	{
-	  	printf("Output report data sent via interrupt transfer:\n");
-	  	for(i = 0; i < OUTSIZE; i++)
-	  	{
-	  		printf("%02x ",data_out[i]);
-	  	}
-	  	printf("\n");
-
-		// Read an Input report from the device.
-
-		result = libusb_interrupt_transfer(
-				devh,
-				INTERRUPT_IN_ENDPOINT,
-				data_in,
-				INSIZE,
-				&bytes_transferred,
-				TIMEOUT_MS);
-
-		if (result >= 0)
-		{
-			if (bytes_transferred == INSIZE)
-			{
-			  	printf("Input report received via interrupt transfer:\n");
-			  	for(i = 0; i < INSIZE; i++)
-			  	{
-			  		printf("%02x ",data_in[i]);
-			  	}
-			  	printf("\n");
-			}
-			else
-			{
-				fprintf(stderr, "Error: not all data received in interrupt transfer (%d)\n", result);
-				return -1;
-			}
-		}
-		else
-		{
-			fprintf(stderr, "Error receiving Input report via interrupt transfer %d\n", result);
-			return result;
-		}
-	}
-	else
-	{
-		fprintf(stderr, "Error sending Output report via interrupt transfer %d\n", result);
-		return result;
-	}
-  	return 0;
- }
-
-