added configuration for Drevena printer which produce satisfactory results.

slic3r_configs/drevo.ini

@@ -0,0 +1,138 @@
+[presets]
+filament = ABS_drevo.ini
+print = drivi.ini
+printer = Drevena.ini
+
+[filament:ABS_drevo]
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 0.87
+fan_always_on = 0
+fan_below_layer_time = 30
+filament_colour = #FFFFFF
+filament_diameter = 2.9
+first_layer_bed_temperature = 100
+first_layer_temperature = 265
+max_fan_speed = 50
+min_fan_speed = 20
+min_print_speed = 10
+slowdown_below_layer_time = 25
+temperature = 265
+
+[print:drivi]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 0
+bridge_flow_ratio = 1.2
+bridge_speed = 30
+brim_width = 3
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 30
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.5
+fill_angle = 45
+fill_density = 12%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 180%
+first_layer_height = 0.25
+first_layer_speed = 30%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 9999
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 35
+perimeters = 6
+post_process = 
+raft_layers = 0
+resolution = 0.05
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 5
+small_perimeter_speed = 30
+solid_infill_below_area = 40
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 1
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+threads = 4
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 10
+travel_speed = 60
+xy_size_compensation = 0
+
+[printer:Drevena]
+bed_shape = 0x0,300x0,300x300,0x300
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0; turn off heatbed\nG0 X0 Y300 ; home X axis, put object in front\nM84     ; disable motors\nM107 ;Stop fan
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 07990960608643F28963159BF1390A8D
+octoprint_host = drevena.local
+pressure_advance = 0
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 25
+start_gcode = M107 ;Stop fan\nG28 ; home all axes\nG92 E0 ; reset extruder\nM220 S100 ;defaultspeed\nM221 S100 ;defaul extrude amount\nM83 ;Set E codes relative while in Absolute Coordinates (G90) mode\nM109 S[first_layer_temperature]\nG1 Z0.350 F7200.000 ;prime extruder\nG1 X1 Y1\nG1 X1 Y101 E2.2515 F1000;print part of skirt 
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 20
+wipe = 0
+z_offset = 0
+