[presets]
filament = ABS_drevo.ini
print = drivi.ini
printer = Drevena.ini

[filament:ABS_drevo]
bed_temperature = 100
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 0.87
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #FFFFFF
filament_diameter = 2.9
first_layer_bed_temperature = 100
first_layer_temperature = 265
max_fan_speed = 50
min_fan_speed = 20
min_print_speed = 10
slowdown_below_layer_time = 25
temperature = 265

[print:drivi]
avoid_crossing_perimeters = 0
bottom_solid_layers = 10
bridge_acceleration = 0
bridge_flow_ratio = 1.2
bridge_speed = 30
brim_width = 3
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 30
external_perimeters_first = 1
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.5
fill_angle = 45
fill_density = 12%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_extrusion_width = 180%
first_layer_height = 0.25
first_layer_speed = 30%
gap_fill_speed = 50
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 9999
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 60
interface_shells = 0
layer_height = 0.25
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 35
perimeters = 6
post_process = 
raft_layers = 0
resolution = 0.05
seam_position = nearest
skirt_distance = 2
skirt_height = 1
skirts = 5
small_perimeter_speed = 30
solid_infill_below_area = 40
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 50
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 1
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 50
support_material_threshold = 0
thin_walls = 1
threads = 4
top_infill_extrusion_width = 0
top_solid_infill_speed = 20
top_solid_layers = 10
travel_speed = 60
xy_size_compensation = 0

[printer:Drevena]
bed_shape = 0x0,300x0,300x300,0x300
before_layer_gcode = 
end_gcode = M104 S0 ; turn off temperature\nM140 S0; turn off heatbed\nG0 X0 Y300 ; home X axis, put object in front\nM84     ; disable motors\nM107 ;Stop fan
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = 
nozzle_diameter = 0.4
octoprint_apikey = 07990960608643F28963159BF1390A8D
octoprint_host = drevena.local
pressure_advance = 0
retract_before_travel = 1
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 3
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 25
start_gcode = M107 ;Stop fan\nG28 ; home all axes\nG92 E0 ; reset extruder\nM220 S100 ;defaultspeed\nM221 S100 ;defaul extrude amount\nM83 ;Set E codes relative while in Absolute Coordinates (G90) mode\nM109 S[first_layer_temperature]\nG1 Z0.350 F7200.000 ;prime extruder\nG1 X1 Y1\nG1 X1 Y101 E2.2515 F1000;print part of skirt 
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
vibration_limit = 20
wipe = 0
z_offset = 0